It is recommended to use the test figures 11Ilda12K.bin or 12Ilda30K.bin in Laserworld Showeditor The test picture shall at least contain an L-shaped line, a rectangle, a circle and some single dots. Select a test figure with various different shapes.Set the scan speed in the software to 50% of the value specified by the manufacturer (see manual of your show laser light system).There are several approaches to determining the correct scan speed. The behavior of the scanning system in different projection angles is not linear and every scanner type has different behaviour and a different relation between the scan angle The scanĪngle of most scanner systems is much wider, up to 60° or even 80°. The value stated as ILDA standard is only valid for an 8° output angle. The scan speed according to the ILDA specifications does not necessarily correlate with a proper show output quality. To determine the optimal scan speed is difficult. ![]() ![]() ![]() It is measured in Points Per Second (pps), often stated as Kilo Points Per Second (1 kpps = 1000 pps). The scan speed of a show laser light system is the maximum speed the mirrors on the Galvo motors can move at without distortion. Adjust Scanner Settings, Set The Correct Scan Speed / Scan Rate (kpps)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |